For cleaning your household sinks, most common household cleaners to meet your needs are. Avoid using abrasives industry and how they are used for toilets. Avoid heavy scrub sponges, bleach, products that are on the label that they remove dull and rust, and those with hydrofluoric acid, hydrochloric acid and / or phosphoric acid or caustic substances. For stubborn stains and / or mineral deposits, a mild abrasive cleaner can be used. Current examples of mild abrasiveCleaners are Bon-Ami, Barkeeper's Friend, Zud or Soft Scrub without bleach.
After every use or cleaning, you build the best wipe your sink dry with a soft cloth to avoid water and minerals to spotting up. We recommend that you regularly cleaned.
Remove deposits from hard water and soap foam, use a 50/50 mixture of vinegar or liquid Lysol and water.
Vitreous China & fireclay sinks - Rinse thoroughly with a soft cloth to dry the product to be cleaned after each use. Soft abrasiveCleaners can be used to scratch but strong abrasive and dull the surface.
Glass Sinks & Bowls - To avoid damage, it is very important to follow the manufacturers cleaning and care instructions. In general, clean with soap suds and water, then wipe it dry with a soft cloth should remove most stains. The glass bowl should be wiped with a dry, soft cloth after each use. Strong abrasives scratch and dull the surface.
For hard to remove stains:
1.Do not use abrasive cleaners such as Ajax, Comet, Bon Ami or Bar Keeper's Friend.
2. Use an abrasive cleanser, such as Scotch-Brite.
3. Fill in case of stubborn stains, such as your Swanston fall quarter full with a 50:50-solution of bleach and water. After ten or fifteen minutes soaking, drain the solution from the sink can be, as you wash and rinse both sides and bottom. Note: Do not use steel wool or metal scouring pads.
For mineral-based stains:
Use cleaners designed to remove iron orRust, as Rust Out, Wink, or Lime-Away.
For marks or discoloration:
White automotive rubbing compound can be used to remove stubborn stains and discoloration.
For scratches:
Start with a Scotch-Brite scouring agents. If this does not remove the scratches disappear and sandpaper, starting with the coarsest dirt and move to the finest sand, until the scratches. Blend area with an abrasive finishing pad.
0 ความคิดเห็น:
แสดงความคิดเห็น