If you have a problem when setting your washing machine, you must not call the repair person, why not try to change it yourself? Most of the problems that are happening in your wheels actually quite common and can be easily fixed. It is absolutely necessary to spend unnecessary money to get a repair man and it is called.
Precautions
Before you fix a washing machine, make sure that the first disc is not connected. Some people think that a small problem could be solved withoutPull the machine, but even the smallest problem, you must separate them. This is mainly for reasons of security. It would also, why do not you prefer that it only takes a second?
Tips for buying parts in repair a ruptured disc
Before you consider broken your old washing machine, you notice that your next washing machine would be broken and come in time, you may need some spare parts as a way to fix it. Therefore, you can check your old washing machine broken prior to disposal andDisassembly of the parts you need. Purchase from a distributor of the washing machine repair is not a good idea because it would be the use of recycled parts washing machines to buy. A better way is to check with wholesale appliance parts suppliers, where you can create new and even cheaper washing machine spare parts.
Spinning or Agitating Troubles
When the washing machine agitator does not want to work, rest easy. Compared to other parts of the washing machine agitators areto resolve relatively simple. The belt is the agitator to work, and if, if this belt is loose, it could get the agitators in the washing machine to malfunction. To see the belt of the mixer, remove the back of the disc. Find the drive belt and press it. If the machine moves ¾ inches, everything you need to do is to tighten it. If you use the belt drive is really damaged, it is time to buy a new one.
In tightening a drive belt, all you need to do is lure alittle the fastening nut of the engine and its engine easily with the mountain railway. Wait until the tape is tight and before the assembly of the mother. Last step is to return the cover and your washing machine is fixed.
Leaking Washing Machine
If you have a leaky washing machine, and it is very likely that the leak comes from the hose. To solve such problems, washing machine, monitor the hose while filling the washing machine. If you look where the leak is, everything you getto do is pull the hose.
Snags or rips in material
If you have problems or cracks in the washing machine, it could come from the bath or stir. Some discs tub is made of plastic material is and it's pretty rust resistance. Unfortunately, the rust has holes in these tubs. When you consider whether it would want any rough spots in your bath, simply place an old nylon stuck over the hand and go over the tub. If there is one point of the hook while your clothesWash, then you will find the stocking density. You could easily fix this with sandpaper and sand it down.
Replacing the Agitator
If your mixer is broken, you need to find a replacement as quickly as possible. A delay could destroy your clothes. In a mixer to replace, just remove the donor that includes removing the agitator, and the screw under it. After this, only to lift the agitator out. If it is difficult to be pulled out, fill the washer with hot water to remove allSoaps and everything she holds. If that does not work, press gently on the agitator with a rubber hammer to loosen it. If the agitator is removed, you can him a new one.
Washer not filling
Each time you notice your washer will not fill with water, could the filter screen from the cold or warm body tube be clogged. To fix this, turn the hot and cold water faucets and remove the hose by unscrewing it. Check the filter screen is dirtyand clean. You should also consider whether the deal flow of water hoses, the washer.
The clothing is Too Wet After Spin Cycle
If you notice that are after the spin cycle, the clothes still wet, it is advisable to check the drain hose for errors. It could be kinked or blocked. Check the hose and clean up with long-handled brush. If you buy one of these long-handled brushes in water or pet shops. You can also use the brushes, which are used forCleaning of the aquarium tubes. When removing the problem of hose kink, so you place it. If it is stocked pretty closely, you would probably replace a new one. Now, you could use your washing machine perfectly!
0 ความคิดเห็น:
แสดงความคิดเห็น